Selective and Partial Residential Demolition in Denver, CO

We offer selective and partial residential demolition in Denver, CO to support additions, wall removals, and structural changes. Our team isolates the work area, protects finishes, and removes only the components your project requires. Contractors and homeowners rely on our precise, clean demo for smooth remodels.

Wrexo Demolition Denver provides professional selective demolition throughout Denver, CO and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (720) 315-7877 or request your free quote.

Selective Demolition in Denver Homes, Done the Right Way

Selective demolition is careful, surgical removal of specific parts of your home while protecting everything you want to keep. Wrexo Demolition Denver focuses on this type of work every day in older Denver bungalows, brick ranches, and newer builds across suburbs like Lakewood, Aurora, and Highlands Ranch.

Instead of knocking everything down, we remove only what your remodel or repair project requires. That might mean taking out a load bearing wall between a kitchen and dining room, stripping a bathroom down to studs while saving the cast iron tub, or gutting a smoke damaged basement without touching the main floor. We pay close attention to how Denver homes are actually built, including plaster over lath in older neighborhoods, brick veneer over frame in mid century homes, and modern engineered lumber in newer subdivisions.

When you talk with our team, we translate your contractor’s plans into a clear demolition scope. We mark exactly what stays and what goes, from walls, soffits, and flooring to cabinets, tile, and old plumbing runs. The goal is simple: set your remodel crew up for fast, clean rebuilding, avoid surprises in inspections, and protect the finishes and structural components that are staying.

How Our Selective Demolition Process Works in Your House

A successful partial residential demolition starts with planning, not swinging hammers. Wrexo Demolition Denver begins with a walkthrough of your home and a review of any drawings or engineering you have. We photograph every room involved, mark structural walls and utilities, and talk through details like which cabinets you want to reuse or which windows must stay protected.

Next, we locate and verify shut offs for electrical, gas, and water. In Denver, many older homes have confusing or partially updated systems, so we trace circuits and lines rather than trusting old labels. If needed, we coordinate with your electrician or plumber to cap or reroute lines before we touch anything.

Once utilities are safe, we set protection. This usually includes heavy plastic zip walls to isolate work areas, Ram Board or similar protection on floors that stay, padded covers on stair rails, and cardboard or foam around door openings. In winter demolition, we pay extra attention to keeping the rest of your home sealed from cold air and dust.

Then the careful removal begins. We typically start from the top down and from finish materials inward. For example, in a kitchen we remove appliances, then cabinets, then countertops, then backsplash, then drywall, then insulation, then framing. In bathrooms, we often break up tile and mortar beds, remove tubs or showers, then open walls to expose plumbing. All debris is bagged or carried directly to our trailer so it does not pile up in your living space.

Before we call a job complete, we vacuum work areas, remove loose nails and screws, and leave framing and subfloors exposed and clean so your GC, inspector, or engineer can see exactly what is there.

Common Selective Demolition Projects Around Denver

Because Denver housing stock is so mixed in age and style, we tackle a wide range of selective demolition projects.

Kitchen wall removals: A typical request is to open a cramped 1950s kitchen to the dining or living room. We carefully strip cabinets, tile, and drywall from both sides, then expose the wall framing for your engineer or contractor. If the wall is load bearing, we leave temporary supports in place until the new beam is installed.

Basement gut and remodel prep: Many older Denver basements have low ceilings, odd partitions, and past DIY finishes. We remove paneling, dropped ceilings, old insulation, and non structural walls while protecting main floor structure above. If there is old knob and tube wiring or mixed plumbing, we expose it so your trades can modernize it in one go.

Bathroom demos in tight spaces: In brick bungalows and Denver Squares, bathrooms are often small and built with heavy materials like mud set tile. We break and remove tile in controlled sections, protect adjoining plaster walls, and keep old cast iron tubs intact if you plan to refinish and reuse them.

Fire, water, or mold damage removal: After a kitchen fire, frozen pipe, or roof leak, we remove only the affected materials. That might mean cutting drywall in clean lines at specific heights, pulling wet insulation, and opening chases so mitigation and drying crews can work efficiently. We coordinate with restoration companies when needed.

Partial exterior work: On some projects we remove sections of siding, porch roofs, or old decks while leaving the rest of the exterior in place. This is common when adding a new addition or enlarging openings for patio doors. We stage this work around Denver’s weather so your home is not left open to a surprise storm.

What Affects Cost and Timeline for Selective Demolition

Selective demolition pricing varies because every home and scope is different, but there are clear drivers that Denver homeowners should know.

Access and protection: Upper story projects in older Denver neighborhoods, where we have narrow staircases and no driveway, require more labor to move debris and set protection. Ground level ranch homes with driveway access are faster and usually less expensive. More furniture to move and protect also means more time on site.

Material types: Plaster and lath, wire mesh mud beds under tile, multiple drywall layers, and masonry all add time and disposal weight. Many central Denver homes have at least some of these older systems. In newer suburbs, demo often goes faster because there is standard drywall and lighter materials.

Hazardous materials: If we suspect asbestos (for example in popcorn ceilings, old vinyl flooring, or certain mastics) or lead paint, we halt demolition until testing is completed. If results are positive, a licensed abatement contractor must handle that scope. We can coordinate sequencing so abatement and demolition fit together without long gaps.

Structural complexity: Removing a simple non load bearing wall costs less than opening up a load bearing wall that needs engineering, temporary support, and precise cuts. If your project involves stairs, chimneys, or roof structure, expect more planning and site time.

Timeline: Most kitchen or bathroom selective demolitions take one to three days. Whole level gut jobs might run three to seven days. We schedule around your contractor’s start date and city inspections so your project does not sit idle between demo and rebuild.

Why Denver Homeowners Choose Wrexo Demolition Denver

Selective demolition work happens right in the middle of your living space, often while you are still occupying the home. That is why homeowners across Denver trust Wrexo Demolition Denver to be careful, respectful, and organized.

We focus on residential interiors, not just big commercial teardowns, so our crews are used to working around kids, pets, and neighbors. We communicate daily about what will be noisy, what will be messy, and when utilities will be temporarily shut off. If you need walkable paths to certain rooms at the end of each day, we plan around that.

Local experience matters. We know to look for old coal chutes and abandoned plumbing lines in Capitol Hill basements, to expect surprise layers of flooring in Barnum bungalows, and to brace brittle structural members in older Park Hill homes. This reduces surprises that can stall your remodeling schedule.

We also think beyond demolition. We cut drywall so it is easy to patch, leave clean stud bays for plumbers and electricians, and avoid unnecessary cuts in framing so inspectors have a clear view. Our goal is for your GC or tradespeople to walk in after we are done and say, "This is exactly what we needed."